Warning: Division by zero in D:\wwwroot\Huang520\wwwroot\catalog\controller\product\category.php on line 236 Arduino Sensor & Module

PT1107 NTC Thermistor Temperature Sensor Waterproof Probe Wire 

DescriptionStainless steel sheath and waterproofMeasurement range: -20 to 105 °CLength of wire: 1 meterSize of probe: 5 x 25 mmOutput: 2 wiresType: NTC 5K 10K 20K±1% 3950measure environmental temperatures using with arduino ADC and this 10k NTC LINKR..


PT1106 DS18b20 temperature probe temperature sensor

Length of Cable : 100CM Size of Stainless steel sheath:6*50mmPower supply range: 3.0V to 5.5VOperating temperature range:-55°C to +125°C (-67°F to +257°F)Storage temperature range:-55°C to +125°C (-67°F to +257°F)Accuracy over the range of -10°C..


PT3111 Mini Data Logger Logging Shield For Arduino/ Raspberry Pi Recorder Shield SD Card 3.3V Regulator

Description:You can get going quickly - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program. The included Real Time Clock timestamps all your data with the current time, so th..


PT5100 USBasp USBISP 3.3V / 5V AVR Downloader Programmer USB ATMEGA8 ATMEGA8

Description:On-board ATMega8 (L)With power and programming indicator lightOn-board overcurrent protectionSupport 5V and 3.3V power supply51 serials:AT89S51AT89S52AT89S53AT89S8252AVR serials:ATTiny12(L), ATTiny13(V), ATTiny15(L), ATTiny24(V), ATTiny25..


PT1208 LilyPad LED Red/Blue/Green/Yellow/White for Arduino

  This is a mini LilyPad of SMD LED equipment.    If you need a small lamp to shine your LilyPad project,    Make your design more grace is more beautiful on the dress,    You need a LilyPad LED a sma..


PT24001 500Wide Angle Fish-Eye Camera Lenses for Raspberry Pi 4/3 Model B Pi 2 Model B+ Arduino

Omnivision 5647 sensor in a fixed focus module.The module attaches to Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI).The CSI bus is capable of extremely high data rates, and it exclusively ca..


PTR3002 LilyPad Tri-Color LED RGB for Arduino

Description: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply ..


PTR3001 CJMCU-LilyPad-Accelerometer 3 axis three axis acceleration sensor module

CJMCU-LilyPad-Accelerometer 3 axis three axis acceleration sensor moduleAnalog Devices ADXL335Triple Axis MEMS accelerometerUltra low power consumption: only 320uASensing range of +/-3gOperating Voltage: 1.8 to 3.6VDC..


PT1032 0.96 inch OLED Display Module For Arduino I2C IIC Serial Blue

0.96 inch OLED with White/Blue/Yellow&Blue color,128x64 resolution. The driver IC is SSD1306 with I2C interface.It is OLED display without backlight and it is low power dissipation .The thickness of galss is only 1.4mm.It is highlight.It is full ..


PT10210 Mini Traffic Light 5V LED Display Module Red Green Yellow Light for Arduino Raspberry Pi

Description:This is a mini-traffic light display module, high brightness, very suitable for the production of traffic light system model.Features:1>. Small size.2>. Simple wiring.3>. Targeted.4>. Custom installation.Parameters:No.Paramete..


Showing 1 to 10 of 10 (1 Pages)