Product Description

4.0-inch IPS full-angle display, support HDMI input, refresh rate up to 60FPS

The physical resolution is 800x480

Raspberry Pi monitor with touch control (need to install touch driver)

It can be used as standard HDMI output device for computer display(no touch function)

Compatible with and can be directly inserted into all versions of raspberry PI motherboards (raspberry PI 1 generation B and Zero need additional HDMI cable)

Support HDMI audio output, backlight brightness adjustable

① 3.5mm Headphone Jack: Output audio signal

② HDMI：Used to connect the main board and LCD display for HDMI transmission

③ Micro USB：Get 5V Power from USB, If ⑤-13*2 Pin Socket has been connected, that this USB interface can be No Connect.

④ Backlight adjustment button: Short press backlight change 10%, long press a few seconds to close backlight; short press to open backlight

⑤ 13*2 Pin Socket：Get +5V Power from raspberry Pi to LCD, at the same time transfer touch signal back to Raspberry Pi.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating     Bad           Good

Captcha

Enter the code in the box below

Continue